The Plantower PMS3003 Air Quality Sensor experiment
Real-time Air Quality readings from the PMS3003

Compartilhar: aqicn.org/sensor/pms3003/pt/
For a complete list of all the Air Quality Sensors test on the World Air Quality Index project, check our sensor overview page.

The PMS 3003 Sensor

The PMS 3003 Sensor is the third generation evolution of the PMS1003 developped by plantower (chinese name: 攀藤 (pānténg).

Especificações

This is the specification for the PMS3003. One should not consider all those values for granted as there is quite often a big difference between what is said to be possible and what is actually possible (and this is why we are setting up all our experiments).
  • Parameters :Index  (Unit )
  • Measuring range :0.3 to 1.0 ; 1.0 to 2.5 ; 2.5 to 10  (mm)
  • Counting efficiency :50%@0.3um 98% @> = 0.5 um 
  • Response time :≤ 10  sec
  • DC supply voltage :5 V
  • Operating current :120  mA
  • Standby Current :≤ 200  µA
  • Data interface level :L <0.8 @ 3.3 H> 2.7@3.3  V
  • Operating temperature range :-20 ~ + 50  °C
  • Operating humidity range :0 to 99% 
  • MTBF :≥ 3  Year
  • Size :65 × 42 × 23  mm

Olhe por dentro para o sensor

Compared to the PMS1003, the PMS3003 is just a mechanical size reduction - the electronic is the same. In the former mechanisms, there used to be a mechanical air chamber, which is now removed a replaced by a simple hole over the diode. This is probably because their attempt to imitate Dylos' pressure drop patent proved to be inefficient in the first generation.
The electronic components are the same, at least for the main CPU, a Cypress CY8C4245. That's a bit disapointing since a higher frequency CPU/ADC could help for the advanced processing so much needed for better understand the air quality. Hopefully this is something we will find in the 7th generation sensor, which is comming quite soon. Stay tunned!
Playing arround with this sensor is quite simple as it exports a serial interface. The pin-out in the following:
  • PIN1  :VCC :Power Supply (5V).
  • PIN2  :GND :Ground.
  • PIN3  :SET :Standby mode (when 0), operating mode (when 1)
  • PIN4  :RXD :Serial receive / TTL level @ 3.3V.
  • PIN5  :TXD :Serial transmit / TTL level @ 3.3V.
  • PIN6  :RESET :Module reset / TTL level @ 3.3V.
  • PIN7,8 :NC :Not connected.

Dados em tempo real

There are two co-located PMS3003 sensors (both are outside). First PMS 3003 outdoor readings are:
  • PM1 count: -,
  • PM2.5 count: -,
  • PM10 count: -,
  • updated on - - (China time).
Second PMS 3003 outdoor readings are:
  • PM1 count: -,
  • PM2.5 count: -,
  • PM10 count: -,
  • updated on - - (China time).

Time series graphs




- -

For the list of all air quality sensors, check the Sensor Overview page

Read or publish comments (they rely on Disqus)

Sobre a medição da aualidade do ar e poluição

Sobre os níveis de qualidade do ar

- Valores do Índice de Qualidade do Ar (AQI)Níveis de preocupação de saúde
0 - 50 Boa 0-50: Boa - A qualidade do ar é considerada satisfatória, a poluição do ar representa pouco ou nenhum risco
51 -100 Moderado 50-100: Moderado - A qualidade do ar é aceitável; No entanto, para alguns poluentes pode haver um problema de saúde moderada para um número muito pequeno de pessoas que são mais sensíveis à poluição do ar.
101-150 Não Saudável para Grupos Sensíveis Membros de grupos sensíveis podem ter efeitos na a saúde. O público em geral não é susceptível de ser afetado.
151-200 Não saudável 150-200: Insalubre - Toda a população pode começar a sentir os efeitos na saúde; membros de grupos sensíveis podem apresentar efeitos mais sérios de saúde.
201-300 Muito Prejudical à Saúde 200-300: Muito Insalubre - As advertências de saúde de situações de emergência. Toda a população é mais susceptível de ser afectada.
300+ Perigoso 300+: Perigoso - alerta de saúde: todos podem experimentar efeitos mais graves para a saúde

Para saber mais sobre Qualidade do Ar e Poluição, verifique o wikipedia Qualidade do Ar tópico ou o guia AIRNow a Qualidade do Ar e sua saúde.

Para informações sobre saúde muito úteis em Pequim, procure Doutor Richard Saint Cyr MD, consulte www.myhealthbeijing.com blogue.


Aviso de uso: Todos os dados da Qualidade do Ar não são validados no momento da publicação e, devido à garantia de qualidade, esses dados podem ser alterados, sem aviso prévio, a qualquer momento. O projeto Índice de Qualidade do Ar Mundial exerceu todas as habilidades e cuidados razoáveis na compilação do conteúdo desta informação e sob nenhuma circunstância o A equipe do projeto World Air Quality Index ou seus agentes podem ser responsabilizados em contrato, responsabilidade civil ou de outra forma por qualquer perda, lesão ou dano decorrente direta ou indiretamente do fornecimento desses dados.



Configurações


Configurações de Idioma:


Temperature unit:
Celcius