The Plantower PMS3003 Air Quality Sensor experiment
Real-time Air Quality readings from the PMS3003

Deel: aqicn.org/sensor/pms3003/nl/
For a complete list of all the Air Quality Sensors test on the World Air Quality Index project, check our sensor overview page.

The PMS 3003 Sensor

The PMS 3003 Sensor is the third generation evolution of the PMS1003 developped by plantower (chinese name: 攀藤 (pānténg).

Specificaties

This is the specification for the PMS3003. One should not consider all those values for granted as there is quite often a big difference between what is said to be possible and what is actually possible (and this is why we are setting up all our experiments).
  • Parameters :Index  (Unit )
  • Measuring range :0.3 to 1.0 ; 1.0 to 2.5 ; 2.5 to 10  (mm)
  • Counting efficiency :50%@0.3um 98% @> = 0.5 um 
  • Response time :≤ 10  sec
  • DC supply voltage :5 V
  • Operating current :120  mA
  • Standby Current :≤ 200  µA
  • Data interface level :L <0.8 @ 3.3 H> 2.7@3.3  V
  • Operating temperature range :-20 ~ + 50  °C
  • Operating humidity range :0 to 99% 
  • MTBF :≥ 3  Year
  • Size :65 × 42 × 23  mm

Kijk naar de sensor

Compared to the PMS1003, the PMS3003 is just a mechanical size reduction - the electronic is the same. In the former mechanisms, there used to be a mechanical air chamber, which is now removed a replaced by a simple hole over the diode. This is probably because their attempt to imitate Dylos' pressure drop patent proved to be inefficient in the first generation.
The electronic components are the same, at least for the main CPU, a Cypress CY8C4245. That's a bit disapointing since a higher frequency CPU/ADC could help for the advanced processing so much needed for better understand the air quality. Hopefully this is something we will find in the 7th generation sensor, which is comming quite soon. Stay tunned!
Playing arround with this sensor is quite simple as it exports a serial interface. The pin-out in the following:
  • PIN1  :VCC :Power Supply (5V).
  • PIN2  :GND :Ground.
  • PIN3  :SET :Standby mode (when 0), operating mode (when 1)
  • PIN4  :RXD :Serial receive / TTL level @ 3.3V.
  • PIN5  :TXD :Serial transmit / TTL level @ 3.3V.
  • PIN6  :RESET :Module reset / TTL level @ 3.3V.
  • PIN7,8 :NC :Not connected.

Realtime gegevens

There are two co-located PMS3003 sensors (both are outside). First PMS 3003 outdoor readings are:
  • PM1 count: -,
  • PM2.5 count: -,
  • PM10 count: -,
  • updated on - - (China time).
Second PMS 3003 outdoor readings are:
  • PM1 count: -,
  • PM2.5 count: -,
  • PM10 count: -,
  • updated on - - (China time).

Time series graphs




- -

For the list of all air quality sensors, check the Sensor Overview page

Read or publish comments (they rely on Disqus)

Over de luchtkwaliteit- en vervuilingsmeting:

Over de luchtkwaliteitsniveaus

- Luchtkwaliteitsindex (AQI)-waardenNiveaus van gezondheidsproblemen
0 - 50 Goed Luchtkwaliteit wordt als bevredigend beschouwd en luchtverontreiniging vormt weinig of geen risico
51 -100 Matig Luchtkwaliteit is acceptabel; voor sommige verontreinigende stoffen kan er echter sprake zijn van een matige gezondheidsrisico voor een zeer klein aantal mensen dat ongewoon gevoelig is voor luchtvervuiling.
101-150 Ongezond voor gevoelige groepen Leden van gevoelige groepen kunnen gezondheidseffecten ervaren. Het grote publiek zal waarschijnlijk niet worden beïnvloed.
151-200 Ongezond Iedereen kan gezondheidseffecten ervaren; leden van gevoelige groepen kunnen ernstiger gezondheidseffecten ervaren
201-300 Zeer Ongezonde Gezondheidswaarschuwingen voor noodomstandigheden. De volledige populatie is mogelijk getroffen.
300+ gevaarlijk Gezondheidswaarschuwing: iedereen kan ernstigere gezondheidseffecten ervaren

Als u meer wilt weten over luchtkwaliteit en vervuiling, raadpleegt u het Wikipedia-onderwerp Luchtkwaliteit of de airnow-gids voor luchtkwaliteit en uw gezondheid .

Voor zeer nuttige gezondheidsadviezen van de Beijing-arts Richard Saint Cyr MD, kijk op de blog www.myhealthbeijing.com .


Gebruiksmelding: Alle gegevens van de luchtkwaliteit zijn niet-gevalideerd op het moment van publicatie en als gevolg van kwaliteitsborging kunnen deze gegevens op elk gewenst moment zonder voorafgaande kennisgeving worden gewijzigd. Het World Air Quality Index -project heeft alle redelijke vaardigheid en zorg besteed aan het samenstellen van de inhoud van deze informatie en onder geen enkele voorwaarde zal de World Air Quality Index projectteam of zijn agenten zijn aansprakelijk in contract, onrechtmatige daad of anderszins voor enig verlies, letsel of schade die direct of indirect voortvloeit uit de levering van deze gegevens.



Settings


Language Settings:


Temperature unit:
Celcius